The Rain Acculevel has two components that makes up the level sensor.

  • The first is the sensor tube that is located in the water storage tank
  • The second is the gateway which acts as the communication device between the sensor tube and the internet

The sensor tube is pre calibrated in our factory to the type of fluid that you are storing. The tube will be supplied to the height of the storage tank to ensure accurate readings.

The gateway device can be located anywhere within the property providing there is access to your local wifi. No cables and can be located up to 1km from the sensor tube.

Fitting the sensor tube

The sensor tube is fitted inside the water storage tank. This can either be done via the calmed inlet pipe that should be inside all rainwater harvesting tanks or using one of the many fixing kits that can be supplied dependent on the type of tank.

Registering your device

Each product is supplied with a 3 word passcode that you use to register your device. You simply log into the online portal, complete the registration information required and then check out the water level in your tank.

It’s as simple as that, plug and play at it’s best!

Data transmission

Every 15 minutes the sensor bar transmits data to the gateway then, via your wifi connection sends encrypted data to our severs. This data is then available to you to review your current level within the tank and also historic data.